
Product Introduction
CD Single Speed Electric Hoist Brief Introduction
Model CD1, single speed wire rope electric hoist is small-sized lifting equipment, which can be mounted on single beam, overhead, gantry and jib cranes, with slight modification; it can also be used as a winch. It is widely used in factories, warehoused, cargo store areas and shops. It is essential equipment in raising working efficiency and improving working conditions.
Brief introduction
Model CD1, single speed wire rope electric hoist is small-sized lifting equipment, which can be mounted on single beam, overhead, gantry and jib cranes, with slight modification; it can also be used as a winch. It is widely used in factories, warehoused, cargo store areas and shops. It is essential equipment in raising working efficiency and improving working conditions.
| Item | Name | Spec. |
| 1 | Reducer | Third-class dead axel helical gear transmission structure is adopted,; gear and gear axel are made of heat treated alloy steel; case and case cover with precise assembly and good seal are made of quality cast iron. The reducer is independent, so it’s easy to load and unload it. |
| 2 | Control Box | It has device with up and down stroke protection of break off limiter and can cut off main circuit in an emergency, which ensures safe operation of electric block. Electric elements are of long service life and operational safety. |
| 3 | Steel Wire Rope | It uses GB1102-74(6*37+1) hoist steel wire rope which is durable in use. |
| 4 | Conical Motor | The hoist motor uses conical motors of relatively stronger starting torque to brake asynchronous motor and does not need extra arrester. The motor's load duration factor is 25%; the motor uses B grade and F grade insulation and its grade of protection is IP44/IP54. |
| 5 | Button Switch | Its hand-operated, easy to handle, and has two modes of cord operation and cordless remote control |
| 6 | Hooks | Load hooks are heat treated and fracture resistant. In case of dangerous overloading or abuse, the hook does not fracture but will slowly yield. |
| 7 | Power | Operating voltage 220-440V, 50/60Hz, 1-3 phase. Low voltage control 36V is standard. High efficient energy-saving motor, asbestos free brake system. 2-speed motor available. Sturdy pole change motors with cylindrical rotors and integrated safety brakes. |
| 8 | Limit Switch | Limit switch devices fitted at both top & bottom ends, switch off power automatically to prevent load chain from running out. |
| 9 | Pushbutton Switch | Pushbutton switch is rain-proof plastic for severe impact and corrosive atmosphere resistance and mechanically interlocked. |
| 10 | Hoisting Gear | Light weight gear units with silent running flat beveled gears deliver the torque required. |
| 11 | Safety Brake | The dual-disk electromagnetic brake features automatic braking in the event of a power failure. As best of free brake linings designed for approx. 1 million braking operations make for long maintenance intervals. |

